Sunday, March 20, 2011

Finale (Finally): DIY Headboard

Drum roll, s'il vous plait! Here is the headboard in all of it's glory. This first picture is a little more sharpened than the second, but hopefully you get a good idea of how it turned out.

The last step was to staple the fabric to the headboard. We had to make sure that we centered the fabric with the headboard on the ground as we pulled the fabric up tightly to make sure it was taut. One of the problems we ran into was pulling it tightly though. As you can see in the picture of the different styles of headboards, the "Portman" has a horizontal area next to the semi-circle on top. I was very persistent on making sure the fabric allowed me to make the angle there, but it was useless. We ended up putting some stuffing in there so it was more of a rounded crevice, and honestly, you can't even tell that it was supposed to be any different!

One of the options for headboards are to fix them to the wall, but we opted against that because it would just be easier if it wasn't attached if we ever moved it. We had some wood left over from our piece of wood we cut the headboard, so we cut out some planks that we screwed on to the back of the headboard which allows it to stand upright as you're seeing it in the picture.

So although this took way too long for me to post, it was a relatively quick process and we completed it in a day. Of course I planned everything out in my spare time in the week prior just making sure I had exhausted all options of how to make it. Good luck on any attempts at your own!

Thursday, March 17, 2011

Instructions: DIY Headboard

Sorry for the lame title, but I decided since "DIY Headboard" is exactly what I searched for on google when I was doing this project, I should go ahead and help anyone who may also be searching for the same thing.

When we left off, I was sitting around as my handyman did all of the dirty work.

He is using a jigsaw to cut out the pattern of the headboard that we choose, which according to the following picture, is the "Portman" style. (How do you even pronounce "Grosvenor"?)

After many lengthy discussions of measurements, tactics for drawing the pattern, and how to obtain maximum accuracy, we finally just dived into it, which allowed for a few mistakes and learning.

I knew the basic measurements of how tall and how wide I needed the headboard to be and also where I wanted the curves to start going up, but the curves ended up being the most difficult things to draw on the piece of wood. We finally configured a makeshift compass out of a pencil and string in order to make sure we were getting a perfect rounded edge. After everything was measured, the handyman used his handy dandy jigsaw tool and cut away. (Cue me blogging the previous post)

Sorry for a lack of photos, but the next few steps included spray glue bought at JoAnn's, padding (actually mattress pads - they were cheaper than the padding at JoAnn's) bought at Wal-Mart, and batting. We had the pattern cut out on the piece of wood, so we laid it down and sprayed it like crazy with spray glue and stuck the padding on first - egg crating
side down. We then sprayed on top of that and stuck the batting on.

The next part is probably similar to intermission. Since we were working at the handyman's house but the headboard belonged at my house, it had to be moved over there, BUT both of our cars were too tiny. Lucky for us we live in a town with golf carts and paths, so here's how we transported it.

And also how we secured headboard on said transportation.

Running joke? Extra wide load on the cart paths coming your way!

Handyman drove while I sat on the back hanging onto that headboard for dear life. We made it to my house with a few minutes to spare before my mom came home from school, so unfortunately it was no longer a surprise but mom just LOVED it! She just had to see what it was going to look like before we even put any of the fabric she had been coveting in the corner of her room for months was even stapled on.

How embarrassing, but I don't have any after pics. They'll come along in the next post :)

[from] here